Somfy

The Somfy module connects Somfy PoE / Synergy shade gateways (and related UDP/TCP paths) so shades can be discovered and controlled alongside other building systems.

Setup

1. Enable Somfy under Modules.
2. Configure gateway connection settings on the module page (and Somfy TCP where used).
3. Run Discovery, assign shades to Groups, and verify commands from Control.

Disable the module on sites that do not use Somfy hardware.

Operators

• Group shades for schedules and façade logic
• Use with Solaris glare / harvest zones where shades participate
• Review command history and module status on /modules/somfy

Related

• Mecho — MechoNet shade paths
• Commissioning
• Solaris