CoreSync / Molex
Two related modules cover Molex lighting gateways on the controller:
| Module | Typical use |
|---|---|
| CoreSync | Molex CoreSync RS-485 / gateway path (coresync/* resources) |
| Molex | Molex OEM gateway path (molex/*), often disabled until needed |
Enable the module that matches the hardware on site under Modules.
Setup
- Enable CoreSync and/or Molex as appropriate.
- Configure gateway addressing and credentials in module settings.
- Run Discovery, assign devices to Groups, and verify control.
CoreSync is the common path for CoreSync deployments; enable the separate Molex module only for OEM gateway sites that require it.
Related
- Commissioning
- INX — MHT PoE path (different manufacturer stack)